macipgw — MacIP Gateway Daemon
macipgw [-d debugclass] [-n nameserver] [-z zone] [-V] network netmask
macipgw provides IP connectivity for devices
connected through an AppleTalk-only network, i.e. LocalTalk or Apple
Remote Access (ARA). macipgw is normally started out of
/etc/rc.
MacIP (formerly known as KIP) is a protocol that allows the encapsulation of IP packets in AppleTalk packets. macipgw registers itself as a MacIP gateway on the AppleTalk network and configures and brings up a tunnel interface (see tun(4)). It then forwards IP packets received from the AppleTalk network to the kernel through the tunnel interface. Likewise, IP packets received through the tunnel are forwarded to the AppleTalk device registered for the destination IP address.
Unlike other MacIP gateways, macipgw needs its own IP (sub-)net to operate, and does not use proxy-ARP for the addresses registered. The gateway will always use the first address in the network for the local address, i.e. 192.168.1.1 for the network 192.168.1.0/24.
macipgw will log operational messages through syslog(3) under the facility LOG_DAEMON.
debugclassSpecifies that the daemon should not fork, and that a trace of all actions be written to stdout. See the source code for useful values of debugclass.
nameserverSpecifies the IP address of a DNS name server the AppleTalk devices connected through the gateway should use.
zoneSpecifies that macipgw should register in zone instead of the default zone.
Show version information and exit.
networkSpecifies the network number to use for the clients.
netmaskSpecifies the netmask for the network.
/usr/local/libexec/macipgw -n 192.168.1.1 -z "Remote Users" 192.168.1.0 255.255.255.0
Starts macipgw, assigning the Class C network 192.168.1.0 for devices connected through the gateway, specifying that the system macipgw is running on can be used as a name server, and that it should register in the zone Remote Users.