Specifies path to AppleVolumes.default file (default is AppleVolumes.default).

Specifies path to AppleVolumes.system file (default is AppleVolumes.system).

Enables or disables reading of the users' individual volumes file entirely.

Enables or disables reading of the users' individual volumes file before processing the global AppleVolumes.default file.

Comma separated list of UAMs. (The default is uams_dhx.so,uams_dhx2.so).

The most commonly used UAMs are:

Sets the default path for UAMs for this server (default is uams).

These are required if the server supports the Kerberos 5 authentication UAM.

Use for e.g. winbind authentication, prepends both strings before the username from login and then tries to authenticate with the result through the available and active UAM authentication modules.

Specifying e.g. -adminauthuser root whenever a normal user login fails, afpd will try to authenticate as the specified adminauthuser. If this succeeds, a normal session is created for the original connecting user. Said differently: if you know the password of adminauthuser, you can authenticate as any other user.

Specifies the servers unix codepage, e.g. "ISO-8859-15" or "UTF8". This is used to convert strings to/from the system's locale, e.g. for authenthication, server messages and volume names. Defaults to LOCALE if your system supports it, otherwise ASCII will be used.

Specifies the Mac client's codepage, e.g. "MAC_ROMAN". This is used to convert strings and filenames to the clients codepage for Mac OS 9 and Classic, i.e. for authentication and AFP messages (SIGUSR2 messaging). This will also be the default for the volumes maccharset. Defaults to MAC_ROMAN.

Sets the maximum number of failed logins, if supported by the UAM (currently none)

Sets the path to the Randnum UAM passwd file for this server (default is afppasswd).

Sets the minimum password length, if supported by the UAM

Enables or disables the ability of clients to save passwords locally

Enables or disables the ability of clients to change their passwords via the Chooser or the "connect to server" dialog

Enables or disables AFP-over-Appletalk. If -proxy is specified, you must instead use -uamlist "" to prevent DDP connections from working.

Enables or disables AFP-over-TCP

Make both available (default)

Allows Mac OS X clients (10.3.3-10.4) to automagically establish a tunneled AFP connection through SSH. If this option is set, the server's answers to client's FPGetSrvrInfo requests contain an additional entry. It depends on both client's settings and a correctly configured and running sshd(8) on the server to let things work.

Specifies the DDP address of the server. The default is to auto-assign an address (0.0). This is only useful if you are running AppleTalk on more than one interface.

Specifies a fully-qualified domain name, with an optional port. This is discarded if the server cannot resolve it. This option is not honored by AppleShare clients <= 3.8.3. This option is disabled by default. Use with caution as this will involve a second name resolution step on the client side. Also note that afpd will advertise this name:port combination but not automatically listen to it.

Use this instead of the result from calling hostname for determining which IP address to advertise, therefore the hostname is resolved to an IP which is the advertised one. This is NOT used for listening and it is also overwritten by -ipaddr.

Specifies the IP address that the server should advertise and listen to. The default is to advertise the first IP address of the system, but to listen for any incoming request. The network address may be specified either in dotted-decimal format for IPv4 or in hexadecimal format for IPv6. This option also allows one to use one machine to advertise the AFP-over-TCP/IP settings of another machine via NBP when used together with the -proxy option.

              fluxxus -hostname afp.example.org -ipaddr 192.168.0.1 -fqdn www.example.com
            

Allows a different TCP port to be used for AFP-over-TCP. The default is 548.

Runs an AppleTalk proxy server for the specified AFP-over-TCP server. If the address and port aren't given, then the first IP address of the system and port 548 will be used. If you don't want the proxy server to act as a DDP server as well, set -uamlist "".

This specifies the DSI server quantum. The default value is 303840. The maximum value is 0xFFFFFFFFF, the minimum is 32000. If you specify a value that is out of range, the default value will be set. Do not change this value unless you're absolutely sure, what you're doing

Scale factor that determines the size of the DSI/TCP readahead buffer, default is 12. This is multiplied with the DSI server quantum (default ~300k) to give the size of the buffer. Increasing this value might increase throughput in fast local networks for volume to volume copies. Note: This buffer is allocated per afpd child process, so specifying large values will eat up large amount of memory (buffer size * number of clients).

Try to set TCP receive buffer using setsockpt(). Often OSes impose restrictions on the applications ability to set this value.

Try to set TCP send buffer using setsockpt(). Often OSes impose restrictions on the applications ability to set this value.

Disable automatic Zeroconf service registration if support was compiled in.

Register this server using the Service Location Protocol (if SLP support was compiled in).

Allows users of a certain group to be seen as the superuser when they log in. This option is disabled by default.

Specifies the path to be used (per server) to store the files required to do CAP-style print authentication which papd will examine to determine if a print job should be allowed. These files are created at login and if they are to be properly removed, this directory probably needs to be umode 1777.

With this switch enabled, afpd won't advertise that it is capable of server notifications, so that connected clients poll the server every 10 seconds to detect changes in opened server windows. Note: Depending on the number of simultaneously connected clients and the network's speed, this can lead to a significant higher load on your network!

Immediately unmount volumes removed from AppleVolumes files on SIGHUP sent to the afpd master process.

Specifies the IP address and port of a cnid_metad server, required for the CNID dbd backend. Defaults to localhost:4700. The network address may be specified either in dotted-decimal format for IPv4 or in hexadecimal format for IPv6.

Maximum possible entries in the directory cache. The cache stores directories and files. It is used to cache the full path to directories and CNIDs which considerably speeds up directory enumeration.

Default size is 8192, maximum size is 131072. Given value is rounded up to nearest power of 2. Each entry takes about 100 bytes, which is not much, but remember that every afpd child process for every connected user has its own cache.

Enables sending FCE events to the specified host, default port is 12250 if not specified. Specifying multiple listeners is done by having this option once for each of them.

Specifies which FCE events are active, default is fmod,fdel,ddel,fcre,dcre.

Coalesce FCE events.

This determines the time delay in seconds which is always waited if another file modification for the same file is done by a client before sending an FCE file modification event (fmod). For example, saving a file in Photoshop would generate multiple events by itself because the application is opening, modifying and closing a file multiple times for every "save". Default: 60 seconds.

Specifies the user that guests should use (default is "nobody"). The name should be quoted.

[Don't] Use the Netatalk icon for mounted volumes. Later Mac OS versions ignores this.

Enable "Continuous AFP Service". This means the ability to stop the master afpd process with a SIGQUIT signal, possibly install an afpd update and start the afpd process. Existing AFP sessions' afpd processes will remain unaffected. Technically they will be notified of the master afpd shutdown, sleep 15-20 seconds and then try to reconnect their IPC channel to the master afpd process. If this reconnect fails, the sessions are in an undefined state. Therefore it's absolutely critical to restart the master process in time!

Sets a message to be displayed when clients logon to the server. The message should be in unixcodepage and should be quoted. Extended characters are allowed.

Specifies the shared volume icon that appears on Mac OS X clients. Defaults to off. Examples: RackMac (same as Xserve), PowerBook, PowerMac, Macmini, iMac, MacBook, MacBookPro, MacBookAir, MacPro, AppleTV1,1, AirPort.

Don't map filesystem ACLs to effective permissions.

Disables debugging.

AFP 3.x waits number hours before disconnecting clients in sleep mode. Default is 10 hours.

Specify a server signature. This option is useful while running multiple independent instances of afpd on one machine (e.g. in clustered environments, to provide fault isolation etc.). Default is "auto". "auto" signature type allows afpd to generate a signature and saving it to afp_signature.conf automatically (based on a random number). The "host" signature type switches back to "auto" because it is obsoleted. The "user" signature type allows an administrator to set up a signature string manually. The maximum length is 16 characters.

first -signature user:USERS 
second -signature user:USERS 
third -signature user:ADMINS

The first two servers will appear as one logical AFP service to the clients - if a user logs in to the first one and then connects to the second one, the session will be automatically redirected to the first one. But if a client connects to the first and then to the third, they will be asked for the password twice and will see resources of both servers. The traditional method of signature generation causes two independent afpd instances to have the same signature and thus cause clients to be redirected automatically to the server they logged in to first.

Max length of UTF8-MAC volume name for Mac OS X. Note that Hangul is especially sensitive to this.

73:  limit of Mac OS X 10.1
80:  limit for Mac OS X 10.4/10.5 (default)
255: limit of spec

Mac OS 9 and earlier are not influenced by this, because Maccharset volume name is always limited to 27 bytes.

Specify that any message of a loglevel up to the given loglevel should be logged to the given file. If the filename is omitted, the loglevel applies to messages passed to syslog.

By default afpd logs to syslog with a default logging setup equivalent to -setuplog "default log_info".

logtypes: Default, AFPDaemon, Logger, UAMSDaemon

loglevels: LOG_SEVERE, LOG_ERROR, LOG_WARN, LOG_NOTE, LOG_INFO, LOG_DEBUG, LOG_DEBUG6, LOG_DEBUG7, LOG_DEBUG8, LOG_DEBUG9, LOG_MAXDEBUG

- -setuplog "default log_info /var/log/afpd.log"

- -setuplog "default log_maxdebug /var/log/afpd.log"

- -setuplog "default log_info /var/log/afpd.log" \
-setuplog "UAMSDaemon log_maxdebug /var/log/uams.log"

Note that for unsetuplog specifying any string as filename is sufficient for the config parser to distinguish between requests to disable syslog logging or file-logging.

- -unsetuplog "default -"

Sets the tickle timeout interval (in seconds). Defaults to 30. A value of 0 disables session timer tickles.

Specify the number of tickles to send before timing out a connection. The default is 4, therefore a connection will timeout after 2 minutes.